|
Flash
Lamp
|
|
|
|
|
|
he
Flash
lamp
will
produce
a minimum of 0.5 watts total optical power from
160 to 4000 NM with a minimum of 0.2 watts from 160 to 400 NM. This
lamp provides an easy to use source of irradiance greater than a
conventional 50 watt D2 lamp. The adjustable ellipsoidal mirror makes
it easy to interface to optics. Standard fiber-optic and vacuum flange
interfaces are available.
|
|
|
|
- Xe/Suprasil replaceable
lamp
- Unit complete with all
power supplies required for operation
- Lamp optical conversion
efficiency as great as 15%
- 15 watt high voltage
power supply integrated into shielded housing
- Ellipsoidal mirror with
adjustable focus
- Operation from 28 V/1 A
power supply
- Colour temperature >
14000 Kelvin
- Adapters to Conflat®
vacuum flanges and UV fiber-optic cable
|
- 40 watt Suprasil
envelope lamp
- High voltage supply -
400 V output
- Maximum input of 28 V
- Pulse width < 2
microseconds
- Pulse jitter typically
less than 200ns
- Output peak to peak
amplitude jitter typically 5%
- Internal oscillator
provides repetition rate of 0 to 100Hz
- Switch selectable
external trigger
- External trigger on low
high transition of TTL pulse
|
|
- Lamp electrode spacing
of 0.1cm
- Ellipsoid mirror
aperture of 1 cm
- Distance between foci of
1.6 cm
- Spot diameter minimum of
0.2 cm and a maximum of 6.0 cm
- Adjustable spot distance
of 3 cm to 100 cm
Configuration (drawing)
|
- Nitrogen purge for
enhancement of flux below 200 NM
- Space qualification
- 4.5 inch Conflat®
flange adapter with 3 inch quartz or Suprasil window
- Fiber optic adapter for
fiber optic bundles up to 0.5 cm in diameter
- OEM models with input
voltages from 10 to 40 volts
- Intensity monitor
|
|
- 1000V
- Flash frequency 100Hz
- Internal and external
trigger
|
